Amphoteric Flocculants
Amphoteric Flocculants
Features:
Brand: SINOFLOC
Product: amphoteric polyelectrolyte
Synonyms: Amphoteric Polyacrylamide, Amphoteric Polymer
Chemical Family: Amphoteric Polyacrylamide
Product Code: See Below
SINOFLOC amphoteric flocculants are partially hydrolyzed polyacrylamide with high molecular weight. This amphoteric polyacrylamide is easily to remove both the positive and negative charged contents particles in a suspension solution.
Amphoteric Polyacrylamide (PAM) Specifications:
Products Feeding:
The solutions of SINOFLOC amphoteric polymer must be prepared in suitable plants equipped with dry powders feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC amphoteric polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a “maturation” time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on amphoteric flocculants, please consult with SINOFLOC team.
Application Areas:
SINOFLOC amphoteric flocculants could be used for municipal wastewater treatment and industrial wastewater treatment. Our products have both anionic and cationic charges on the same macromolecule and could be used to remove both positively and negatively charged contaminant in suspensions.
Coagulants
Coagulants
Features:
Brand: SINOFLOC
Product: cationic coagulants
Product Code: See Below
SINOFLOC offers an extensive range of organic coagulants such as polyamine, polyDADMAC and decoloring agent. Our products, being the cationic coagulants, could either be used alone or in combination with aluminium base inorganic coagulants. With our products, the coagulants consumption will be reduced dramatically and the treatment cost and will be decreased. Also the treated sludge volume and general disposal cost will be reduced.
Coagulants Specifications:
Polyamine
PolyDADMAC
Application Tips:
Our polyamine could be used as mixture compatible with polymeric alumimum for coagulation water treatment of turbid river and tap water. Our polyDADMAC could be used in wastewater treatment, textiles, cosmetics, mining, paper making, soil treatment and oil industry. The product is widely used in the drinking and waste water treatment, especially for that high-level-grimed water.Each application requests different water treatment process to deal with the water, like water quality, substrate variability, water specifications and cost optimization. Moreover, different equipment and different sludge types also the factors need to be considered. We have both emulsion and powder cationic coagulant. SINOFLOC team can support customers to select the right product type.
Red Mud Settling Flocculants
Red Mud Settling Flocculants
Features:
Brand: SINOFLOC Product: alumina bayer process
Synonyms: Hydrolyzed anionic polyacrylamide, Anionic Polymer
Chemical Family: Anionic Polyacrylamide
SINOFLOC red mud setting flocculants is used for settling aluminum red mud slurries in alumina plants, which provide high settling rates, better separation performance and reducing suspended solids significantly. SINOFLOC products could improve the liquor filtration operations and make the processing more economical.
Red Mud Settling Flocculants Specifications:
SINOFLOC DT 9619 is with very high molecular weight, powder based, to be used in alumina plants to settle red mud slurries of extraction of aluminium. It contains anionic polyacrylamide functional groups with high anionic charge.
SINOFLOC DT 991 is with high molecular weight, emulsion based, to be used in used to settle mud in the red mud washing circuit of refining aluminium. These products are a combination of acrylamide and acrylate with very high anionic charge.
Application Area:
SINOFLOC products could be used in alumina bayer process. Red mud settling requires using the efficient flocculants to bridge and entrap the find red mud solids to separate the solids from liquor rapidly. The more efficient of our flocculants in this process, the lower the cost of red mud separation.
Cationic Flocculants
Cationic Flocculants
Features:
Brand: SINOFLOC
Product: cationic polyelectrolyte
Synonyms: Cationic Polymer, Cationic Polyelectrolyte
Chemical Family: Cationic Polyacrylamide
Product Code: See Below
SINOFLOC cationic flocculants are co-polymers of acrylamide with increasing proportions of cationic monomers. The cationic groups, which are thus introduced into the polymer, have positive charges in aqueous solution. Our cationic polyacrylamide is available in solid powder and emulsion forms.
Cationic Polyacrylamide (PAM) Specifications:
Products Feeding:
The solutions of SINOFLOC cationic polymers must be prepared in suitable plants equipped with dry powders feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC cationic polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a “maturation” time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on cationic polymer, please consult with SINOFLOC team.
Cationic Flocculants for Municipal Wastewater Treatment
Cationic Flocculants for Paper Making
Cationic Polyacrylamide for Oil & Gas Industry
Anionic Flocculants
Features:
Brand: SINOFLOC
Product: polyacrylamide anionic
Synonyms: Hydrolyzed Anionic Polyacrylamide, Anionic Polymer
Chemical Family: Anionic Polyacrylamide
Product Code: See Below
anionic flocculants are co-polymers of acrylamide with increasing proportions of acrylate groups, which give the polymers negative charges, and thus anionic active character, in aqueous solution. Our anionic polyacrylamide is available in solid powder and emulsion forms.
Anionic Polyacrylamide (PAM) Specifications:
Products Feeding:
The solutions of SINOFLOC anionic polymers must be prepared in suitable plants equipped with dry powders feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC anionic polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a “maturation” time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on anionic polymer, please consult with SINOFLOC team.
Application Areas:
Anionic Flocculants for Industrial Wastewater Treatment
Anionic Polyacrylamide for Oil & Gas Industry
Anionic Polyacrylamide for Mining Process
www.sinofloc.com
With a solid thirteen-year history of growth and expansion, SINOFLOC Chemical Ltd has become a leading manufacturer and supplier of water-soluble polymers in China. Founded in 2003 and expanded production capacity since 2009, now we have 2 facilities with the flocculants and coagulants capacity of 90,000 MT annually.
We offer a portfolio of polymers which are widely used in various fields including municipal & industrial water treatment, oil & gas, mining, paper making, sugar and SAP for physical hygiene & agriculture use etc.
We have a team powered by dedicated and compassionate staff who could assist you selecting a polymer for all you diversified needs.
www.sinofloc.com
With a solid thirteen-year history of growth and expansion, SINOFLOC Chemical Ltd has become a leading manufacturer and supplier of water-soluble polymers in China. Founded in 2003 and expanded production capacity since 2009, now we have 2 facilities with the flocculants and coagulants capacity of 90,000 MT annually.
We offer a portfolio of polymers which are widely used in various fields including municipal & industrial water treatment, oil & gas, mining, paper making, sugar and SAP for physical hygiene & agriculture use etc.
We have a team powered by dedicated and compassionate staff who could assist you selecting a polymer for all you diversified needs.
